CAE-Driven Product Design
Electromagnetic Simulation to Analyze the Performance of RADAR Sensors in Active Safety System of an Automobile
Srivathsa Jagalur - Autoliv India, India
On CSP-Stirling Engineering Analyses
Roger Sjöqvist - Cleanergy AB, Sweden
Using Fluid Structure Interaction (FSI) to Design Air Cushions Used to Decrease Friction Losses
Sam Fredriksson - Semcon Caran AB, Sweden
Integrating Multi-Disciplinary Optimization into the Product Development Process using Model-Based Systems Engineering (MBSE)
Mikael Törmänen - Volvo Car Corporation, VCC, Sweden
Development of a Transmission Housing out of CFRTP
Monika Kreutzmann - P+Z Engineering GmbH, Germany
Hot Spot Analysis of Composite Structures with Orthotropic Properties
Henrik Molker Volvo Car Corporation, VCC, Sweden
Topology Optimization of Suspension Arm by Using Finite Element Method Guralp Basaran FNSS
Savunma Sistemleri A.S, Turkey
Solve Bi-level Optimization Problems Using Nested Approach and Design Optimization Software
Simone Silvetti - Esteco SPA, Italy
Simulation of Solder Joint Fatigue of Electronic Device at Board Level As Well As Within an Assembled ECU Under Temperature Cycle
Sabyasachi Bouri - Robert Bosch Engineering and Business Solutions, India
First Time True Design Process Development of Engine Connecting Rods
Mustafa Kutlu - FORD OTOMOTIV SANAYI AS, Turkey
Evolution of CAE Tools: CAE Driven Design Development
Oleksiy Kurenkovm - TE Connectivity, Germany
Nonlinear Dynamic Effects Induced By an Automotive Dual-mass Flywheel
Antonio Palermo - Ferrari, Italy
Casting Process Simulation for Robust and Optimized Castings With Tailored Properties
Laura Leineweber - MAGMA Gießereitechnologie GmbH, Germany
Developing Model-based Controllers for RTP Reactors
Kunal Jain - ESI North America, USA
Lubrication and Churning Losses Prediction by Moving Particle Simulation
Massimo Galbiati - EnginSoft SpA, Italy
Machine Learning Approaches for Data from Car Crashes and Numerical Car Crash Simulations
Jochen Garcke - Fraunhofer Institute SCAI, Germany
Applying Artificial Intelligence to Product Design and Engineering
Peter Chow - Fujitsu Laboratories of Europe Limited, UK
Pre-validation Analysis of New Type Wiper System Using Virtual Rig Test Hong
Suk Chang - Hyundai Motor Company, South Korea
Fatigue Optimization of Laser Welded Impeller at Grundfos – An Industrial Case Study
Brian Lundsted Poulsen - Grundfos Holding A/S, Denmark
Optimization-driven Design of Hydraulic Pump Components
Nicholas E. Pedersen - Grundfos Management A/S, Denmark
Dental FEA as a New Prevention and Diagnosis Methodology
Giuseppe Miccoli - Instituto IMAMOTER, Italy
An Efficient Topology Optimization of a Box-beam Structure Considering Crash Loadings and Rate-dependent Nonlinear Material Behaviors
Cheol Kim - Kyungpook National University, South Korea
Development and Impact of Multi-body Dynamic Simulation of Washing Machine
Martin Ortega - Mabe S.A. de C.V., Mexico
ESI Cloud Platform for CAE Analysis
Sanjay Choudhry - ESI North America, USA
Types of Combining FEM and MBD and Their Advantages
Christof Rachor - MSC.Software GmbH, Germany
Composite Structures Simulation and Design Process Enhancement
Patrick Morelle - SIEMENS PLM Software Belgique, Belgium
Simulation Driven Innovation/Design, the “"Structural Sketch”"
Ronald Van Dijk - Van Dijk FEM engineering, Netherlands
Seismic Analysis of a Fluid Filled Container Using Non-Linear and Dynamic Simulations
Pier-Olivier Duval - Creaform - Ametek, Canada
Simulation-driven Design of Traffic Control Devices to Meet Regulations and Road Safety Objectives
Pier-Olivier Duval - Creaform - Ametek, Canada
A Full FEM-based Design and Later Post-damage Analysis on Nickel Flowgrids in Combined Cycle Power Plants
Ingmar Van Dijk - NEM Energy, The Netherlands
A New Method for the Engineering and dDsign of Endless Fiber Reinforced Components
Marco Grote - Universität Siegen, Germany
Patient-Specific Multiphysics Modeling of a Shoulder Implant
Vishal Sharma - ANSYS UK Ltd, UK
Bridging the Gap Between Geometry and Simulation with a Platform Approach for Topology Optimization Michael Werner - Dassault Systemes Deutschland GmbH, Germany
A Comprehensive Model for Numerical Optimization of Mechanical Joining Processes
Ingo Neubauer - Simufact Engineering GmbH, Germany
Process Parameter Optimizing for Resin Transfer Molding by Numerical Filling Simulation
Jaganath Thirunavukkarasu - Leoben University, Austria
Continuous CAE Chain for Composite Design, Established on an HPC System and Accessible via Web-based User-interfaces
Luise Kaerger - Karlsruher Institut für Technologie, Germany
SE-DM: Multi-disciplinary Model Management With SPDM as Enabler for Digitalization
Marcus Krastel - em engineering methods AG, Germany
Smart Extraction of Intelligent Simulation Information from Simulation Data to Enhance the Value of SPDM Solutions
M Gopala Krishnaiah - Visual Collaboration Technologies, India
Simulation Driven Design : How to Improve Collaboration?
Antoine Navarro - Digital Product Simulation, France
< Back to the list of all accepted abstracts
