NAFEMS International Journal of CFD Case Studies

Volume 9, January 2011

ISSN 1462-236X

Towards Virtual Testing of Compression Systems in Gas Turbine Engines

A. I. Sayma
University of Sussex, Thermo-Fluid Mechanics Research Centre, School of Engineering and Design, Brighton BN1 9QT, UK

https://doi.org/10.59972/gxbuf1zn

Keywords: Low Pressure Compression System, Turbofan Engines, Boundary Conditions, Outflow Guide Vanes, Steady-State Analysis, Virtual Testing, NASA Rotor 67

Abstract

Current trends in the computational fluid dynamics (CFD) analysis of gas turbine engines are in the direction of the so called “virtual testing”. Although this term is used nowadays loosely in the context of this application, the ultimate objective of virtual tests is to replace partly or fully rig and engine tests during the design and certification of engines. In the past few decades, significant developments have been achieved in the discretisation methods and the associated CFD algorithms. Combined with the rapid developments in hardware in both speed and memory which are becoming increasingly available at affordable prices, the simulation of full engine or rig tests are increasingly becoming a reality.
This paper describes a method by which virtual tests can be conducted on a low pressure compression system of a gas turbine engine using smart boundary conditions and allowing the sweep along a speed characteristic or sweep along a working line during the mapping of the compressor characteristic in a similar fashion to a typical rig test. The low pressure compression system is equipped with a variable downstream nozzle and the rotational speed is allowed to vary during the computations. The simulations are validated using NASA rotor 67 experimental data against which good agreement was obtained.

References

Chima, R. V. (1991) “Viscous three-dimensional calculations of transonic fan blades”, 77th symposium of propulsion and energetics panel: CFD techniques for propulsion applications, sponsored by AGARD, San Antonio, Texas, May 27-31 1991.

Fottner, L. ed. (1990), Test cases for computation of internal flows in aero engine components, AGARD Advisory Report No. 275, AGARD, Neuilly-Sur-Seine, France, July 1990.

Sayma, A. I. (2007) “Steady flow analysis of low pressure compression system for turbofan engines”, ASME turbo expo 2007, Montreal, GT2007-27625, Canada 14-17 May 2007.

Sayma, A. I., Vahdati, M., Imregun M. and Marshall, J.G. (2007), “Low pressure compression system effects on fan assembly forced response” ASME turbo expo 2007, GT2007-27665, Montreal, Canada 14-17 May 2007

Sayma, A.I., Vahdati, M., Sbardella, L. and Imregun M. (2000) “Modelling of 3D viscous compressible turbomachinery flows using unstructured hybrid grids” AIAA, Journal, 38(6), (2000), 945-954.

Sbardella, L., Sayma, A.I. and Imregun, M. (1999) “Semi-Unstructured Meshes for Axial Turbomachinery Blades” International Journal of Numerical Methods in Fluids. 32(5), (1999), 569- 584.

Spalart, P. R., Allmaras, S. R., (1994), “A one-equation turbulence model for aerodynamic flows”, La Recherche Aerospatiale, 1, p 5ss. ( also AIAA paper 92-0439)

Strazisar, A.J., Wood, J. R., Hathaway, M. D. and Suder, K. L., (1989), “Laser anemometer measurements in a transonic axial flow fan rotor”, NASA TP-2879, Nov. 1989.

Vahdati, M., Sayma, A. I., Freeman, C. & Imregun, M. (2005) “On the use of atmospheric boundary conditions for axial-flow compressor stall simulations” Submitted to the ASME J of Turbomachinery, 127, (2005), 349-351.

Vahdati, M., Sayma A. I., Simpson, G. and Imregun, M. (2007) “Mulitbladerow Forced Response modelling in Axial-Flow Core Compressors”, ASME Journal of Tuebomachinery, 129, (2007), 412- 420

Wilson, M., Imregun, M and Sayma, A. I. (2007), “The effect of stagger variability in gas turbine fan assemblies” ASME Journal of Tuebomachinery, 129, (2007), 404-411 Wilson, M. (2006), The effect of blade variability in gas turbine fan assemblies, PhD thesis. Imperial College London.

Wu, X., Sayma, A. I., Vahdati, M. and Imregun. M. (2004) “Computational techniques for aeroelasticity and aeroacoustic analyses of aero-engine fan assemblies” International conference on fans, IMechE, London, Nov 2004

Wu, X., Vahdati, M., Sayma, A. I.& Imregun, M. (2005) “Whole-annulus aeroelasticity analysis of a 17-bladerow WRF compressor using an unstructured Navier-stokes solver” International Journal of Computational Fluid Dynamics. 19(3), (2005), 211-223

Cite this paper

A. I. Sayma, Towards Virtual Testing of Compression Systems in Gas Turbine Engines, NAFEMS International Journal of CFD Case Studies, Volume 9, 2011, Pages 29-42, https://doi.org/10.59972/gxbuf1zn